LCB700 Blue Flame Combi Boiler – Internal Model for installers
The LCB700 Blue Flame Combi Boiler range can achieve an A+ energy rating when combined with 3 Smart Plus room thermostats – making it the first in the UK market to do so. The PRV/Condensate drain, and flexible pipework arrangements make it super easy to install, cutting down on installation times.
Technical Data
Heat Output
DHW
Flue
Dimensions
Weight
ErP Efficiency
ErP Efficiency with Smart Plus
EN Regulation (EN13203-1)
NOx Emission Rate
LCB700 Blue Flame Combi Boiler – Internal Model for installers
What does the fault code E302 mean for the LCB700?
This means that the system pressure is too low and you may see that the system pressure gauge or the pressure reading on the front display indicates that the pressure in the system is below the 1 bar pressure.
To re-pressurise the system you will find a filling loop (metal braided flexible hose) on a combi boiler version near the top right of the boiler with two tap connections at either end of the filling loop. Two small black tap handles.
The taps should be opened a quarter of a turn. Open one small black tap one and then open slowly the other small black one. The water will start to refill the system (water should be heard filling the system). You should see the pressure gauge or the reading on the front display rise back up between 1 bar and 1.2 bar pressure and then stop filling.
Once the pressure gauge is between 1 bar and 1.2 bar turn the taps back to the off position and the water will stop filling the system. The error code E302 will stop and the boiler will now operate. If the error code E302 is still active, fill up the system a little more but not over 1.5 bar.
(If you do fill the system too much and the pressure gauge is too high, just bleed water from a radiator until the pressure on the gauge goes down to below 1.2 bar).
Related Accessories
How can we help you?
